Penicap

The Penicap is a own developement of Lustlock.com in collaboration with a specialized piercing studio for chastity piercing in Switzerland.

A cage system, which is fixed on a Prince Albert or Frenum Piercing,  without any ballclamps. A unique solution for serious, longterm male chastity: comfort, safety, hygiene, everyday usability.

 

NEW Versions of the PENICAP:

– for Frenum Piercing fixation (longshaft only)
for Prince Albert short – and longshaft  version

The new Penicap v2 is now 2 years on the market. The new version is now made according individual configuration and sizes by 3d laserprinting.

New in the program we have a version for Frenum piercings wearers. Condition is a strong tissue bridge over the frenum (or it may tear) , and a 3mm piercing (9 G). No further Prince Albert fixation  necessary.Works only in combination with the longshaft variant of the Penicap, because Frenum piercings are somewhat moveable and do not give such a precise fixation like a PA piercing.

For PA Variant (Prince Albert) in 5 mm (4G) or 8mm (0 G) pin size: Longshaft available, which is, depending on the size, 24 – 28mm longer. Suitable for men, who can masturbate by stroking the shaft only. But: it means also more volume, which is a slight drawback of the brilliant comfort of the short version.

Short or Long Version?

A long version (Frenum only in long, PA short or long version) is not always better:

It is only recommended to men who are able to cum by stroking the shaft, without touching the glans.
The short version is  has less volume, gives your penis more movement and more flexibility in your pants.

The long version is more difficult to mount: insertion of the PA pin or the hasp needs more training, and the help of tweezers, or a cotton bud, etc. But you will succeed.

Frenum Penicaps must be longshaft, otherwise fraud is possible.

Taking off is as quick as in the short version.

COMPULSORY PRECONDITIONS for a Penicap are

  • PRINCE ALBERT PIERCING  of 5mm or 8mm (4 or 0 G)
    or
  • FRENUM PIERCING of 3mm (9 G)
  • CIRCUMCISED or LOOSE FORESKIN (which can be worn permanently rolled back)

Way of function and description

The glans is protected by a anatomical formed, hard-case thermoplast lightweight mould, in which the glans gets locked by a pin, which replaces the Prince Albert piercing. The mould is in some dimensions slightly undersized to your measurements. The erected glans gets clamped in the specially designed housing, and will not move forth or back anymore. The pin is locked outside of the case by a tiny, special designed security lock. The case inhibits any manipulation, touching, caressing, pumping etc of the glans. Only in a limp state a movement of the shaft and glans against the housing is possible.

Because of its compact and small construction, comfort and hygienic conditions,

Wearing Time

The Penicap can be worn for unlimited time and in every possible life situation- sports, cyling, riding, swimming, etc..It can be worn under tight jeans.It is airport safe. The penicap is very comfortable, the wearer gets immediately used and will not notice the presence of a PeniCap.

Erections

Only under erection you will feel the sensation of pressure on your glans. The PeniCap allows erections, which are not painful. To allow erections (especially in sleep) is much more sound , than to hamper them, what most other chastity device do. And more erotical in play (teasing and denial…
Sleep may be interrupted in the beginnig of wearing, but this subsides in most cases quickly in a few days.

Urination

is easily possible. Also peeing in standing position is possible with a fairly good jet thoruigh the front hole. Mop up remaining drops of urine with a piece of toilet paper. The inside can dry by the perforated and ventilated design.

Cleaning

In locked condition wash in the shower a sufficient cleaning. Bing soap inside the case with your small finger and wipe out the inside. Nevertheless regular cleaning is recommended, at least once a fortnight, and take off the penicap. Put the case in a dish washing machine. You need also to check for irritations on the glans from time to time. The lock has to be maintained also from time to time. (Clean, oil, sometimes ultrsound cleaning).

All existing other male chastity devices like the CB’s , full cover models etc., have essential drawbacks for a everyday usability. The well known problems are insufficient functionality, i.e. protection against masturbation or ways to escape. Chafing, bulky volume, poor hygiene, simply uncomfortable or harmful for health (models with clamping behind the testicles may constrict and retain venous testicular bloodflow, and have a permanent high pressure on the skin), are the major drawbacks.

Few men succeded to orgasm also in a Penicap, mainly by stroking the shaft alone above the cage. But it makes it really difficult, and for the majority unpossible to cum. But for those intractables we have developped the longshaft model…

SIZE

Outer dimensions short tube version: from 45 x 37 x 48 mm (incl. lockhousing) to 57 x 51 x 64 mm, acc. to model size.

Outer dimensions long tube version: from 45 x 37 x 66 mm (incl. lockhousing) to 57 x 51 x 92 mm, acc. to model size.

For inner dimensions and how to choose your size see Dimensions

Material

Cage and pin made of strong, stiff and mechanical resistand Polyamid (“Nylon”), a skinfriendly thermoplast. Resistant to solvent, alcohol, urine etc., heat resistent up to 90°C.

Colors FDA approved.

In a superior version the pin can also be ordered in Tianium, glossy polished.

Locks are a german security lock qualitity brand product, which have been refined by Lustlock (same type of lock like for piercings locks: all corners and edges rounded), coated with silver or gold, and  with a special hasp which fits only to the penicap.

Weight

total ca. 30 gr incl. lock

Versions and Colors

– Case polyamid: in several colors and sizes (see shop), slightly rough surface (better protection against slipping!)

– Pin: Polyamdid black, polished,, in correspondant size to the case, or Titnanium polished.

– Lock in gold or silver coated. Gold lock with keys in steel or gold, silver lock with keys in silver only.

MEASUREMENT CHART for Penicap dimensions

Measurements & Sizes:

The Penicap sizes are made according the most common sizes of penis of different indivduals, due to our longstanding experience and knowledge of their variety. Our sizes A-F cover about 98% of all sizes, we have ever met. The correct measurement of the circumference behind the glans is most important for a good functionality and comfort.

How to take a measurement:

Measure your penis, take with a caliper distances of penisshaft in two planes behind the glans at the most narrow diameter and place the caliper without compression. Measure several times, and take an average of all measurements.

Diameter of soft penis = Size of Penicap

see table below

example: Penis soft

28 mm: Penicap C
34 mm: Penicap E

Attention: If your penis has a strong difference between soft and hard state:
more than 5mm:         1 size larger
more than 8 mm:        2 sizes larger

  • the Penicap does’nt work properly, if the size was chosen too large:  As a rule the Penicap must be smaller 3-4 mm than the full erect penis.
  • you can choose the Penicap also a bit smaller, than recommended, and still works. But never smaller than 2 mm less, otherwise discomfort will be sure.
  • men with a foresking (foresking must be very loose, or problems will arise) should choose one size taller.

Inside Dimensions of Penicap:

replaces old sizing A-F, since introduction of a new size

Size

Internal diameter Penicap  in mm,
smallest diameter of shaft behind glans

 

 

 

 transverse,1st. diameter

 2nd. diameter

1

24

23

2

26

24

3

28

26

4

30

28

5

32

30

6

34

32

7

36

3

Table to download and print

Daily cleaning

The PeniCap becomes wet by urine several times daily. If urine can’t dry immediately, unpleasant smells will develop. Shower or bathing daily cleans the mounted PeniCap well. Put soap cream from outside on, browse through with the shower.

Weekly cleaning

for a thorough cleaning you have to take off the PeniCap. Soap and brush it from inside, best with a toothbrush.

During longer use, sediments of urine (urine scale) will develop. To remove these put the PeniCap every 2-4 weeks in a urine descale removing solution, as it is used for toilet cleaning and lime removal (contains acetic acid). Rinse with water after cleaning thoroughly.

The penicap can be washed in a dishwasher up to 65°.

The Penicap is solvent resistant: Alcohol, benzine. Not against Salmiak (ammonium chloride) and Aceton: Color bleaching!

Don’t forget to oil the lock regularily, even if not opened.

The lock shoul be cleaned also regularly and oiled. Clean also in a ultrasound bath from time to time for thorough cleaning.

To check all reviews, Please click here

How to mount a Penicap

The mounting of a penicap can be tricky for the first few times. But you learn quickly, how to manange your glans inside, and how to insert the PA pin through the holes. Manouvering with your small finger inside helps a lot. Condition of a easy insert is a completely soft penis.
The long shaft version is more difficult, but also manageable.
Opening and taking off the Penicap is a thing of some seconds.

Special Notes for the PA Penicap

(specially helpful for the long version):

  • place your penis in the housing, when completely small and limp.
  • make it wet with water, gel, or massage oil.
  • bring in your little finger on the bottom side, between case and penis flesh.
  • help to adjust, by massaging the penis in the correct position
  • align front hole opening with opening of urethra
  • introduce the pin
  • when pin is half way in, introduce again your little finger on the bottom side.
  • lift away tissue with your finger, in order to get a gap between lower hole and case
  • come out with the pin, direct it with the little finger to align with the bottom hole
  • still keep away the tissue, when pushing the pin through from the front end, now with force.
  • As soon it looks out at the bottom case hole, pull it out completely from the bottom
  • check for correct position of the locking bar of the front end in its groove.
  • insert lock-hasp through the pin
  • check alignement of hasp, side of the closure hasp to lock
  • push lock home, whilst supporting pin from the front end.

Finis. You’re locked.